Soundmate defualt password7/25/2023 With the default (factory) settings, access to the Keenetic's management (its web configurator and command line) from the Internet is blocked. Do not open access to the router's web interface and command line from the Internet without necessity. Avoid using the same password for different sites or purposes.Ģ. Include numbers and other symbols in the password. Use complex passwords of at least 8 characters long. TIP: Tips: If you are concerned about the security of your router on the Internet, we can recommend the following:ġ. For more information, see ' SSH remote access to the Keenetic command line'. SSH settings will only appear in the web interface after the 'SSH server' system component has been installed. Starting from version KeeneticOS 3.1, you can select 'No access', 'HTTP and HTTPS' and 'HTTPS only' in the 'Remote access' settings. If you need to allow access to Keenetic control from the Internet, specify the protocol (HTTP/HTTPS, TELNET or SSH) in the 'Remote access' section. NOTE: Important! After changing the default port for the web configurator, you will need to enter it in your browser along with the IP address: IP_address:port_numberĪfter changing the default port for the command-line interface, you will need to use the telnet command: telnet IP_address port_number In the 'HTTP port' and 'TELNET port' fields, you can specify a different port number than the default ones (TCP/80 and TCP/23). In addition to user management settings, on the 'Users and access' page, you can also change the default TCP ports for connecting to the web configurator and command-line interface (CLI) of the router. In this example, a 'user' account has been created. Below, tick the services and applications you want to grant access to the user. Type the user's password twice in the 'Password' and 'Repeat password' fields (maximum password length is 32 characters). user01, vpnuser, homeuser, root_007, guestvpn, etc.). Still, it is acceptable in combination with numbers or other characters (e.g. user, home, root, guest, vpn, etc.), which can lead to incorrect system operation. We do not recommend using system (service) names that can be misinterpreted by the router's operating system (e.g. Do not use a username consisting only of numbers. NOTE: Important! The maximum length of a username should not exceed 32 characters. In the appeared window 'New user' enter the new account's name in the 'Username' field. To create a new account, click the 'Create user' button. Access can only be restored from the router's command-line interface by following the instruction How to restore access to the web interface. TIP: Tip: Do not unnecessarily disable access to the router's web interface for the administrator (admin) account. TIP: Note: The access rights list depends on the router model and the components installed in the KeeneticOS system. This password is required when connecting to the web interface of the router and changing settings. NOTE: Important! Remember or save the administrator password. In the window that appears, enter the new administrator password twice in 'Password' and 'Repeat password'. To change the administrator password in the 'User accounts' section, click on its entry. Only the built-in admin account can be used to manage the Wi-Fi System. Besides, the 'admin' account cannot be deprived of the right to access the command-line interface (TELNET and SSH) and full (Read/Write) access to the router settings.Īll account information (login and password) on the router is case-sensitive. The account with the reserved username 'admin' cannot be deleted or renamed. NOTE: Important! By default, one admin account is preset in the Keenetic router. User accounts are required to control access to services and applications installed in the Keenetic router. You can set up an administrator password and accounts for other Keenetic router users on the' Users and access' page.
0 Comments
Leave a Reply. |